Cleveland CycleWerks ACE Full Specifications

Cleveland CycleWerks ACE to add personal touch to bikes

Cleveland CycleWerks ACE: What excites a young blood most is a Sexy and Stunning bike for which you have dreamed for years. Bike is not just an vehicle it is passion and craziness when it belongs to some of the most trusted brands and has amazing features in it. Cleveland CycleWerks, an American motorcycle manufacturer based in Cleveland, Ohio. The company has always proved that it has been committed to “making world class motorcycles” and this Heist was their first global launch. Cleveland bikes are for riders who like to add a personal touch to their rides, and that underlines the philosophy behind its hand crafted motorcycles.

The Ace is a retro-classic commuter powered by the same 230cc engine as the Heist, sitting in a traditional single-cradle frame. The Ace’s engine is in the same tune as the Heist’s, putting out 14.8hp at 7,000rpm and 15.8Nm at 5,500rpm. Ace bike is available in two variants – Standard and Deluxe. The Standard is a pretty basic motorcycle, while the Deluxe has got some special and wanted upgrades such as aluminium wheels, inverted forks, wider bars, dual surface tyres, rear disc brake and a flat seat. The Ace Standard has a wheelbase of 1,280mm, while the Deluxe gets 1,325mm. Both have a seat height of 785mm and weigh 136kg wet. Just check out our table to check their amazing specifications.

Specifications:

Engine
Type Single Cylinder, OHV Air Cooled Engine
Displacement 229cc
Max Power 11.5 kW / 15.4 HP @7000 RPM
Max Torque 16.0 N-m @6000 RPM
Bore X Stroke (mm) 67 X 65
Compression Ratio 9.2 : 1
Lubrication Oil, Pressure & Splash
Starting Electric & Kick Start
Ignition CDI Electronic
Transmission
Cluth Wet Multiplate
Transmission 5 Speed, Manual
Gear Shift pattern 1-Down, 4-UP
Chassis
Frame Square backbone, stressed engine High carbon steel
Front Suspension Inverted Telescopic Fork
Rear Suspension Twin Hydraulic Shock Absrobers Spring pre-load adjustable 5 stage
Wheels & Tyres
Front Tyre 4.10 – 18
Rear Tyre 4.60 – 17
Front Wheel 2.50 X 18* Aluminum rim Spoke Wheel
Rear Wheel 3.50 X 17* Aluminum rim Spoke Wheel
Brakes
Front 298mm Disc 2 Piston Slide Caliper
Rear 210mm Disc Single Piston Slide Caliper
Brake Fluid DOT3/DOT 4
Dimensions (mm)
Legnth X Width X Height 2100 X 830 X 1100
Wheelbase 1350
Saddle Height 760
Ground Clearance 188
Engine 133Kg
Fuel Tank Capacity 14L

Is there anything else that you wanted or can expect from a bike? Your one ride will be enough to make it your want and desire.

This post was published on February 15, 2018 5:09 pm

Gaurav:
Related Post